- Stucco moldings
- Bas-reliefs & nbsp;
- 3D Gypsum Panels & nbsp;
- Decorative stone & nbsp;
- Length - 400 mm & nbsp;
- Width -150 mm
- Thickness - 25 mm
- Products weighing no more than 1.5 kg.
- Hard, dry, free from dirt, dust, oil stains and exfoliation.
- The surface of the products before applying the composition must be treated with a universal primer.
- If there are large irregularities, the base must be leveled with plaster.
Water consumption per 1 kg of dry mix
0.35-0.45 L / kg
Start setting freshly prepared mixture
Not earlier than 60 minutes.
The strength of the hardened solution after 7 days
When bending - not less than 4 MPa;
At compression - not less than 10 MPa
The adhesion strength of the hardened mortar after separation after 7 days
Not less than 0.5 MPa
|From + 5 ° С to + 30 ° С|
Next, mix the mixture manually, either with a construction mixer or a drill with a nozzle & nbsp; at least 5 minutes & nbsp; until a homogeneous mass is obtained, then & nbsp; stand for 3 minutes and mix again briefly.
- Evenly, with a thin layer, distribute the composition on the surface of the decorative element.
- Remove excess mortar immediately.
- Drying time up to 7 days.
You can select and send the order to the points of sale closest to you.
Important! partner prices differ from those indicated on the site.
When ordering directly from us, the products will be shipped from the central warehouse in Samara.
Market "at the bird"
Market "On Elizarova"
OOO "Samara Center of building materials"
Selected for order:Choose products
If you are ready to buy more than 10 tons at once, when contacting via the feedback form or by calling the number 8 800 500 70 63 you will be assigned personal manager who will prepare for you a personal advantageous offer!
Bulk order process:
You can see detailed information on the page terms of partnership agreements .
It is interesting and profitable to work with us!