Dear customers,
Making DIY gypsum figurines is very easy.
We invite you to try and read the instructions for using SCULPTOR, the ready-made casting mix!
Mortar preparation
The product is mixed with water according to the “mix-to-water” principle. Only clean containers, tools and water should be used!
Stir the mixture using a construction concrete mixer or a drill with a mixing paddle for at least 2 minutes until smooth and homogeneous.
The consistency may very: if the details of the mold are very small, it makes sense to make the mortar more liquid.
Important! When the mortar has already been mixed, do not add water to it!
Filling the casting molds
Pour the mixed material of the desired consistency into a mold previously moistened with water.
Demolding of products
Removal of molds depends on the quantity and quality of the water used. If the manufacturer's recommendations are properly followed, products can be demolded after 30 minutes. When the products are dried completely, further use of dyes is possible. The ready-made mix can also be used to produce external decorative elements with their subsequent treatment with water repellents.